Bronco Stripping

Hold On Because Stacey Goes To Check Out A Stripper…An Automotive Stripper That Is! All To Show You What’s Involved In Powering Away Thirty-Some Years Of Rust And Crud On Project “Crazyhorse”, The Old ’66 Ford Bronco. Then We’ll Take A Look At A ’99 Dodge 4x4 Sitting On Airbags And 44” Tall Tires

Season 5, Episode 1

About Classic Trucks!

Classic Trucks!

Classic Trucks! Season 5 Episodes

Bronco Stripping

Hold On Because Stacey Goes To Check Out A Stripper…An Automotive Stripper That Is! All To Show You What’s Involved In Powering Away Thirty-Some Years Of Rust And Crud On Project “Crazyhorse”, The Old ’66 Ford Bronco. Then We’ll Take A Look At A ’99 Dodge 4x4 Sitting On Airbags And 44” Tall Tires

Bronco Stripping

Season 5, Episode 1

Flame Thrower

Today, Stacey and crew head out to line-x to show you what to look for in choosing a spray-in bedliner, and then what is involved in having it sprayed in. Then, Stacey turns up the heat and takes the mystery out of flamethrowers by showing you how they work and how to install them…uh…safely

Season 5, Episode 2

Adding Propane Injection and Nitrous Boost to a Chevy Duramax Diesel

The diesel performance race is heating up, but how high can it go? Stacey decides to see by pushing and tweaking a new 4x4 Chevy duramax diesel to show just how much power can be squeezed out of a diesel without blowing it up. This show is all about big numbers, big power, and how to win money fro

Adding Propane Injection and Nitrous Boost to a Chevy Duramax Diesel

Season 5, Episode 3

Ford F-150 Engine

Superchargers aren’t just for hot rods, they also can be very useful on an everyday, work truck. To prove that point, stacey starts project “sportsman”, a 2002 ford f-150 4x4, by installing a blower and intercooler to make that engine come alive for towing or hauling or just tooling around

Ford F-150 Engine

Season 5, Episode 4

Ford F-150 Exhaust

Project “sportsman”, our 2002 ford f-150 4x4, concludes as Stacey slaps on a custom hood, billet grille, and performance exhaust. But that’s not all. Bigger, meatier wheels and tires round out the package so the truck has the look and attitude to match the supercharger under the hood. Then just to

Ford F-150 Exhaust

Season 5, Episode 5

Project Copperhead: 1967 Chevy C10 Engine Part 4

The Project Copperhead rolling chassis is finished up with engine pulleys and brackets.

Project Copperhead: 1967 Chevy C10 Engine Part 4

Season 5, Episode 6

Chrome Plating

Stacey and crew pay a visit to one of the premere chrome shops in the nation to show you what is involved in the legendary process of “triple chrome plating”. Then it’s back to the shop for some tips on how to polish aluminum and keep it shiny, all in your own garage with very simple tools. This is

Season 5, Episode 7

El Camino

This is one for you budget-minded guys as Stacey takes an ’83 El Camino, and gives it a body make-over. Transforming it from your momma’s grocery getter to an SS Elky with attitude, and showing that one of these truck/car hybrids could be one of the best fun-per-dollar projects out there. After that

Season 5, Episode 8

Dump Truck

Most truck owners at one time or another, have wished there was some way to get their truck bed to dump. Today, Stacey shows you how to make that wish come true, by installing a kit that converts your bed into a dumper without changing the stock look of the truck. So throw the shovel aside and ch

Season 5, Episode 9

Lift Kit

Hold on because today things get really big and bad as Stacey shows you how to take a ford superduty and wrestle on 8 inches of lift and squeeze on 38 inch tall tires to make a rig that not only commands attention on the road, but also can take command off road. Then we’ll take a look at the new Sub

Season 5, Episode 10

Top Truck Challenge

They call it the top truck challenge and people come from all across the nation to see if they have the top truck. It’s wild, it’s crazy, and it is some of the best four-wheelin’ you’ll see anywhere, because it’s mud, it’s rocks, it’s hills, it’s water. It’s everything you could possibly throw at a

Top Truck Challenge

Season 5, Episode 11

Custom Metal Work

Today things get technical as Stacey digs into some custom metal work and shows you what’s involved in shaving your door handles, frenching a license plate, and bringing exhaust tips out through a body panel. We’ll follow that with some tips on keeping your 4x4 properly lubricated.

Custom Metal Work

Season 5, Episode 12

Crazy Horse Paint

Project Crazy Horse, the ’66 bronco, is back from the paint shop and looking good.

Crazy Horse Paint

Season 5, Episode 13

Sport Silverado

The sport Silverado project continues as Stacey slips on some new brakes, headers, exhaust, hood, wheels and tires, all the stuff that you would want to put on your truck to make it a little slicker, smoother, and faster, but still keep it practical for everyday use. After that we take a look at a

Sport Silverado

Season 5, Episode 14

Crazy Horse Seats

Crazy Horse is going together fast with everything from seats, to roll bar, to fender flares.

Crazy Horse Seats

Season 5, Episode 15

Crazy Horse Completion

The final touches are added to Project Crazy Horse: winch, bumpers, and lights.

Crazy Horse Completion

Season 5, Episode 16

Dodge 4x4 Lift Kit

Today we are going big and rugged as we take a new dodge 4x4 truck and stick it up in the air with a 6” lift and 37” tires. We also have a cool bike to show you that’s packin’ a ford flathead v8!

Dodge 4x4 Lift Kit

Season 5, Episode 17

Project Copperhead: 1967 Chevy C10 Interior Part 5

Stacey digs into Project Copperhead's interior, filling it up with new seats, dash, door panels, you name it.

Project Copperhead: 1967 Chevy C10 Interior Part 5

Season 5, Episode 18

Project Copperhead: 1967 Chevy C10 Final Part 6

Stacey shows you how to install the body, fenders, & bed on your truck and not scratch it up in the process!

Project Copperhead: 1967 Chevy C10 Final Part 6

Season 5, Episode 19

More Crazyhorse

Don't know the difference between original, reproduction, and nos parts? You will after watching todays show as Stacey rolls copperhead back into the shop and assembles the doors, fenders, and grill. After that, we'll introduce you to the Currie family and show you why they have the nicest rear-end

More Crazyhorse

Season 5, Episode 20

Gibson Guitar

We take a look at some of the options you have when you are building an engine for your truck, from nitrous, to superchargers, to fuel injection. Then it’s off to the Gibson guitar custom shop to take a look at the building of some very special guitars. And finally some of the crazy, behind the sc

Season 5, Episode 21

Mario at the Track

The new Dodge hemi is hot, and Stacey takes one that is destined for the SEMA show and does a little tweaking on it. Then it’s off to the racetrack to run it through the paces. While we are at it, we might as well ask Mario Andretti what he thinks about it! Then it’s back to the shop for a specia

Mario at the Track

Season 5, Episode 22

Classic Trucks! Builds

Copperhead is a popular 1967 Chevy C10 build that starts from a stock cab and frame, adding a few aftermarket parts and with some work turned into an incredibly fast street truck that looks like a show truck!

Sergeant Rock is a 1941 Dodge Power Wagon that was pulled out of the field and turned into a tribute truck for the Memphis Belle, a World War II B-17 bomber.