XOR - Xtreme Off-Road
PowerNation On The Road
Search & Restore
Off Road Action
Top Dead Center
Car Crash/Car Accident
Apps & Platforms
How To Swap Out A Lock Cylinder
You may have come across this situation before: you're out scouring the junkyard trying to find a tilt column and you find one! But of course, the keys are missing. Well here's how to swap out that lock cylinder.
Latest PowerNation Garage Episodes
Tips For Welding Sheet Metal
As you know, when welding there is a lot of heat. But what you might not know is that if there's too much heat on a metal part it can actually cause it to distort and bend.
5 Common Types Of Welding Filler Rods
When it comes to welding, a MIG welder is very forgiving. It has a spool of wire inside and all you have to do is pull the trigger and it lays down a pretty nice weld. If you're welding different types of metal or need a nicer weld, the TIG welder comes into play. And for that, you need filler rod.
Pros And Cons Between Power Adders
Installing a power adder is a great way to pump up the power and torque in your vehicle. There are, however, several different options available which can make deciding which one to go with difficult.
Essential Tools To Have In A Trail Recovery Bag
You never know what you might run in to or could happen out on the trail, so it's nice to be prepared. Here are a few key items you want to make sure to have in your recovery bag the next time you head out.
How To Interpret Dyno Results
When engines are dyno-ed there is often focus on peak horsepower and torque numbers. Those numbers are useful in understanding how an engine will handle its application. However, it's equally important to look at the overall power band and operating range of the engine.
How To Simulate Resistance Spot Welds
Welding takes lots of time and patience to be good at. But once you get the hang of it you can do a lot of work in your own shop rather than taking parts elsewhere.
How To Set The Pressure In Off Road Tires
If you have off-road tires on your rigs, you can't always go by the manufacturer's recommended tire pressure - especially if you drive on the streets as well.
How To Make A Spare Driveshaft
Here's how you can make a driveshaft that'll get you off the trail, back to camp, and up on the trailer.
How To Build A Tool Hanger
Ever go to get something from your toolbox or your buddy something and realize it's a complete disaster you may need to build yourself a tool hanger!
How To Make A Cover For A Transmission Tunnel
Here is a quick way to not only cover the transmission but also keep the dirt out of the cab when on the trails.
Want more content like this?
Join the PowerNation Email Newsletter