More CJ8 Scrambler Episodes

Xtreme 4x4 Builds

Parts Used In This Episode

Auto Meter
COBRA Vintage Sport Series fuel level
Auto Meter
COBRA Vintage Sport Series fuel level sending unit
Auto Meter
COBRA Vintage Sport Series speedometer
Auto Meter
COBRA Vintage Sport Series oil pressure gauge
Auto Meter
COBRA Vintage Sport Series tachometer
Auto Meter
COBRA Vintage Sport Series water temperature
Dupli-Color
Dupli-Color Truck Bed Coating. Dupli-Color┬о Aerosol Truck Bed Coating. Dupli-Color┬о Truck Bed Coating Roller Kit.
Flowmaster
Super 44 Off-Road series mufflers and Universal exhaust system.
Mickey Thompson
17x9, 8-6.5, Classic II Mickey Thompson wheels.
Painless Performance
Universal - 20 Circuit Weatherproof Chassis Harness.
Aqualu Industries Inc.
Aluminum replacement body shell for CJ-8 Scrambler, dash panel blank.
Champion Beadlock
Rock Thrasher Beadlock Conversion with Rock Knobs.
CTM Racing Products
Dana 60 CTM U-Joint.The rebuildable feature is unique in the fact that now as long as the cross or caps are intact then the seals bushings and clips can be replaced indefinitely.These U-joints are designed for use with full circle clips which means you will need to install them into some high quality CHROME-MOLY axle shafts.The Dana 60 u-joints (CTM part #C160-3750) from CTM Racing Products replace the OEM stock part #5-332x.
Doc's Blocks
Custom radiator and fan package with custom radiator cap.
Essentially Off-Road
EOR offers a cage custom made to compliment the Jeep in all its different design. Whether it is a early model short wheelbase or a late model, all cages are designed to each Jeep model.
Great Lake Off Road, LLC
14 Bolt pinion yoke guard will fit over both the 1350 & 1410 yokes.
Hudlow Axle
Machining and respline of stock Dana 60 axles to fit 30 spline 14 bolt axle pattern.
Interco Tire Co.
14/42-17LT IROK Tires.
JB Conversions
The LoMax case is a nodular iron casting machined to exact tolerances taken from the original New Process drawings. Aside from the stronger nodular iron recipe, the LoMax case offers more internal ribbing and wall thickness than the original NP205. The 3:1 gear set offered in the LoMax transfer case is stronger than the original New Process gears. The tooth width is wider than stock yet the overall case dimensions are equal to stock New Process design.
Kilby Enterprises
Trail Boss Gas Tank Skid Plate.
O'Reilly Auto Parts
Window Cleaner, Paper Towels, Microcloth, Toggle Switch, Toggle Cover, 40 Amp Relay, Relay
Off Road Design
The Doubler is an all gear, dual transfer case system uniquely suited to full size trucks or other heavy duty, high output/abusive applications because of the durability of its components (all massive helical gears and large input/output shafts). Adapter plate for NP203 to TH400.
PRP Seats
Premier Series vinyl covered custom seats and floor mounts.
Randy's Ring & Pinion
Cut to fit Yukon axles, 5.38 Yukon gears, Detroit Locker.
Rock & Roll Offroad
4340 Chromoly driveflange kit, provides 100 percent engagement between axle and wheel, eliminating free wheeling hubs.
Rusty's Off Road
Replacement TJ Grille shell.
Rusty's Off Road
3" TJ long arms suspension system, with Radius Arms in front, and 4 link in the rear. Designed for increased wheel travel and more articulation. Jeep bumpers front and rear.
Throttle Down Kustoms
Custom Hybrid Frame frame with Scambler body mounts and Jeep TJ suspension.
Trent Fabrication
Trent Fab hoods are virtually indestructible. They are stock configuration and are available for Jeep TJ, YJ, CJ and Toyota FJ40's.They are available in Clear, Smoke, Blue, and Red.